Originally Posted by piperpilot964

Hey folks, hoping to gain some insight after much searching.

I just finished a complete retrofit of the Pivoting Badge RVC system into my US 2009 2.0T CC with RNS-510. Camera is 3AE-827-469-A, Camera control unit is 3AE 907 441. After coding of the CAN Gateway everything worked great but no guidance lines. I drove the car after install completed and once my steering re-calibrated itself, the RVC would then flip open on reverse, but no video. Double checked video cables on camera and control unit, VAGCOM scan showed module not coded and no calibration data for camera module 6C. Looking at 6C I could see the coding was at it's default, the max value.

After looking around I here I found the coding of 0010021 recommended for Camera Control Module 3AE 907 441. I applied that coding and w00t!!! video. Still no guidance lines, but I have seen them flash up from time to time... but maybe once I calibrate it I will see those....?

The other issue is I keep seeing the fault of no communication for trailer hitch module....SO it looks like that code although giving me video is a code for another vehicle. I also suspect the code is preventing me from getting guidance lines to display?

So my question is simple....Can any one shed light on what the proper coding for the 3AE 907 441 module in a 2009 US CC should be?

Thanks in advance

Check this out